• 全部
主办单位:煤炭科学研究总院有限公司、中国煤炭学会学术期刊工作委员会
煤岩三轴蠕变-渗流-吸附解吸实验装置的研制及应用
  • Title

    Development and application of tri-axial creep-seepage-adsorption and desorption experimental device for coal

  • 作者

    王登科彭明魏建平付启超夏玉玲

  • Author

    WANG Deng-ke1,2,3 ,PENG Ming1,2 ,WEI Jian-ping1,2,3 ,FU Qi-chao1,2 ,XIA Yu-ling4

  • 单位

    河南理工大学河南省瓦斯地质与瓦斯治理重点实验室-省部共建国家重点实验室培育基地河南理工大学安全科学与工程学院煤炭安全生产河南省协同创新中心河南理工大学计算机科学与技术学院

  • Organization
    1. School of Safety Science and Engineering,Henan Polytechnic University,Jiaozuo  454000,China;2. State Key Laboratory Cultivation Base for Gas Geology and Gas Control,Henan Polytechnic University,Jiaozuo  454000,China;3. The Collaborative Innovation Center of Coal Safety Production of Henan,Jiaozuo 454000,China;4. College of Computer Science and Technology,Henan Polytechnic University,Jiaozuo  454000,China
  • 摘要
    为研究受载含瓦斯煤岩流变过程中的渗流规律和煤体瓦斯吸附解吸特性,自主研制了煤岩三轴蠕变-渗流-吸附解吸实验装置,该装置主要由主机、伺服加载系统、三轴压力室、孔压控制系统、吸附解吸系统、温度控制系统、变形测量系统以及安全防护系统等8个部分组成,其最大轴压为500 k N、最大围压为50 MPa、最高加热稳定温度为90℃,试件尺寸为?50 mm×100 mm。该装置具有以下主要优势:能实现煤岩孔隙率的测试、煤岩力学参数测试、煤岩瓦斯吸附解吸实验和受载含瓦斯煤的蠕变-渗流等多种实验,功能强大、性能稳定、测试准确;采用了滚珠丝杠加载方式,满足了蠕变-渗流等实验的长期加载需求,最长加载时间能达2个月以上;配备了高低温控制系统,能实现煤岩试样进气端、出气端和三轴压力室3处的气体温度保持一致,有效避免了温度变化所导致的气体流量上的测量误差。同时利用该装置分别开展了煤样孔隙率测试、受载含瓦斯煤样解吸特性和含瓦斯煤样的蠕变-渗流实验研究,实验验证了该装置在功能上的多样性和在测试上的准确性和可靠性。
  • Abstract
    A tri-axial creep-seepage-adsorption and desorption experimental device has been developed to study seep- age law and gas adsorption and desorption characteristics in the process of loaded gas bearing coal rheology. It is com- posed of testing main machine,servo-controlled loading system,triaxial compression chamber,pore pressure control system,adsorption and desorption system,temperature control system,deformation monitoring system and safe guard system. The maximum axial pressure is 500 kN,and the maximum confining pressure is 50 MPa. The heating tempera- ture can reach as high as 90 ℃ ;and the dimensions of tested cylinder samples are ϕ50 mm×100 mm. The advantages of the device are as follows:① It can be used to test the porosity and mechanical parameters of coal and to carry out the gas adsorption desorption and creep-seepage experiments of loaded gas-bearing coal and other experiments as well. The device,in addition,is powerful in function,stable in performance and accurate in testing. ② It can also be fitted to conduct creep-seepage experiments for long time because of adopting the ball screw loading mode. And the maximum loading time can be more than two months. ③ The device is equiped with high and low temperature control system. And it can be used to keep the constant temperature at the gas inlet,gas outlet and the triaxial compression chamber, which can effectively avoid the messurement error caused by temperature variation. Experiments of coal porosity tes- ting,gas desorption characteristics and creep-seepage lawof loaded coal are conducted using this device. These conclu- sions validate the functional diversity,accuracy and reliability in testing on the device.
  • 关键词

    受载含瓦斯煤蠕变渗流吸附解吸实验装置研发

  • KeyWords

    loaded coal containing gas;creep;seepage;adsorption and desorption;experimental device development

  • 基金项目(Foundation)
    国家自然科学基金资助项目(51104059;51304072);河南省基础与前沿技术研究计划项目(132300413203);
  • DOI
  • Citation
    Wang Dengke,Peng Ming,Wei Jianping,et al. Development and application of tri-axial creep-seepage-adsorption and desorption experi- mental device for coal[J]. Journal of China Coal Society,2016,41(3):644-652.
  • 相关文章
相关问题

主办单位:煤炭科学研究总院有限公司 中国煤炭学会学术期刊工作委员会

©版权所有2015 煤炭科学研究总院有限公司 地址:北京市朝阳区和平里青年沟东路煤炭大厦 邮编:100013
京ICP备05086979号-16  技术支持:云智互联