目的目的为了解决双向DC-DC电力变换器的软故障诊断精度不高的问题,方法方法提出基于改进LSTM-SVM的双向DC-DC电力变换器故障诊断模型。首先,分析双向DC-DC电力变换器中电容、电感和MOSFET管的故障机理,通过仿真实验模拟各元件失效后变换器的输出电气参数变化,从而确定变换器不同元件故障时对应的故障特征参数;其次,构建改进的LSTM-SVM双向DC-DC电力变换器故障诊断组合模型,在LSTM中添加Mogrifier门机制,提高LSTM提取时间序列原始数据中微弱特征的能力;最后,由于传统LSTM的末端分类器为Softmax,其主要解决单一元件诊断问题,变换器故障类型较多,维数较高,所以采用麻雀搜索算法优化的SVM代替原有的Softmax函数,对LSTM输出的数据进行故障分类,提高故障诊断的准确率。设置双向DC-DC电力变换器充放电两种状态下,包含电解电容、电感和MOSFET单双管故障在内的24组故障,分别采用本文构建的改进的LSTM-SVM和原始的LSTM-SVM双向DC-DC变换器故障诊断模型进行诊断。结果结果结果表明,改进的LSTM-SVM故障诊断模型诊断准确率平均值为99.71%,原始的LSTM-SVM故障诊断模型诊断准确率平均值为88.48%,改进的LSTM-SVM故障诊断模型对各元件的故障诊断正确率均高于原始的LSTM-SVM故障诊断模型的。结论结论基于改进LSTM-SVM的双向DC-DC电力变换器故障诊断模型实现了对双向DC-DC电力变换器中的电解电容、电感和MOSFET单双管故障的准确诊断。

Objectives In order to solve the problem of low accuracy of soft fault diagnosis for bidirectional DC-DC power converter, Methods the fault diagnosis model of bidirectional DC-DC power converter based on improved LSTM-SVM was proposed.Firstly,the fault mechanisms of capacitors,inductors and MOSFET tubes in bidirectional DC-DC power converter were analyzed.The variations of the output electrical param⁃eters of the converter after the failure of each component were simulated by simulation experiment,and the fault characteristic parameters corresponding to the failure of different components of the converter were de⁃termined. Then,an improved LSTM-SVM bidirectional DC-DC power converter fault diagnosis model was constructed. The Mogrifier gate mechanism was added to LSTM to improve the ability of LSTM to extract weak features from the original time series data.Finally,since the end classifier of traditional LSTM was Soft⁃max,it mainly solved the problem of single component diagnosis,the converter had many fault types and high dimension,so SVM optimized by sparrow search algorithm was used instead of the original Softmax function to classify faults from LSTM output data and to improve the accuracy of fault diagnosis.24 groups of faults including electrolytic capacitor,inductor and MOSFET single and double tube faults were set up under two states of charge and discharge of bidirectional DC-DC power converter.The improved LSTM-SVM constructed in this paper and the original LSTM-SVM bidirectional DC-DC converter fault diagnosis model were respectively used for diagnosis. Results The average accuracy of the improved LSTM-SVM fault diagno⁃sis model was 99.71%,and the average accuracy of the original LSTM-SVM fault diagnosis model was 88.48%. The accuracy of the improved LSTM-SVM fault diagnosis model for each component was higher than that of the original LSTM-SVM fault diagnosis model. Conclusions The fault diagnosis model of bidi⁃rectional DC-DC power converter based on improved LSTM-SVM was realized to accurately diagnose the electrolytic capacitor,inductor and MOSFET single and double tube faults in bidirectional DC-DC power converter.